The Best Lawn Mower Blades for Wet Grass Buying Guide

The first thing you should know before proceeding is that it is dangerous to try and mow wet grass. There are several reasons to this, but perhaps the most important and relevant reason is that in case of an anomaly, you may get electrocuted.

Water and electricity are not good friends, and you may be the one to suffer the consequence in case they meet. The other reason is that you are likely to slip and fall in the wet grass, and being near a powered mower with sharp blades, you may sustain debilitating injuries.

However, there are circumstances that call for grass maintenance even when it is wet. The truth is that a regular blade may not be able to accomplish this task, and it may also sustain a lot of damage from the effort. You may also end up ruining the quality of your grass as it refuses to co-operate with the blade. So what to do?

There are blades that are actually made to be able to handle wet grass. They are usually dense and heavy and they have ‘teeth’. They rotate at extremely high speeds, using force to cut through the grass seamlessly. So what are these blades and what are their main characteristics?

This article will review a few of these blades and also offer a buying guide on how to find the best blade for mowing wet grass. It is my hope that you will come along!

The Best Lawn Mower Blades for Wet Grass

Name of Blade	Material	Length	Action
Greenworks 10” Mower Blade	Heat treated steel	10 inches	Buy Here
Oregon Gator Mulcher 3-in-1 Mower Blade	Steel	21.8 inches	Buy Here
MaxPower 331376B Mower Blade	Steel	22 inches	Buy Here
Honda 72531 –VH7-000 Lawn Mower Blades	Steel	20.75 inches	Buy Here
USA AYP340BP Mower Mulching Blades	Steel	21 inches	Buy Here
MaxPower 561713X 2-Blade Mulching Set	Steel	21 inches	Buy Here
Toro 22” Recycler Mower Blade	Steel	22 inches	Buy Here

The Best Lawn Mower Blades for Wet Grass Products Review

Greenworks 10” Mower Blade – Ideal for medium sized and small lawns

This heat treated steel blade is small but it is quite powerful.

Features

• Made with heat treated steel
• It is 10 inches long
• Compatible with Greenworks Twin Force Mower

This blade is actually quite small when compared to other blades. This does not mean it is not powerful, though. It is made using heat treated steel that makes it able to withstand even the toughest grass when it is wet.

It measures 10 inches in length, and it is actually an inch shorter than the mower deck to allow some clearance between them. The blade is easy to install and remove for sharpening or replacement.

This blade comes as one unit, and it can be used as a replacement for the Greenworks Twin Force Mower.

Pros

• It is made using heat treated steel for strength and durability
• It is powerful
• It is shorter than the mower deck for clearance
• It is compatible with the Greenworks Twin Force Mower
• It is inexpensive

Cons

• It is ideal for smaller lawns

Verdict

This blade is quite small as compared to other strong blades. It work just fine in a medium sized or small lawn setting. It is a strong blade that makes it able to cut through wet grass.

View price here

Oregon Gator Mulcher 3-in-1 Mower Blade – Powerful blade for tough and wet grass

This blade is made with steel and has ‘teeth’ that increase its strength and precision and allow it to get the grass off the way.

Features

• It is 21.8 inches long
• The center hole has a diameter of 0.44 inches
• It is made using steel
• It can replace the OEM No 104-8697-03 and 108-9764

This blade is made to be strong and durable. At high rotation speeds, it has the ability to cut through tough and wet grass. At 21.8 inches in length, it can be able to cover a wider area than some blades, making it ideal for medium sized lawns.

The center hole’s diameter measures 0.44 inches, making it easy to install and replace. The good thing about this blade is that you can use it in place of the OEM No 104-8697-03 and 108-9764.

This blade is quite affordable and durable, making it quite economical. Aside from working well on wet grass, it has the capacity to cut through tough grass types.

Pros

• It is made with steel which makes it strong
• It is a durable blade
• It is easy to attach and detach
• It is an ideal blade for medium sized lawns
• It can replace two other blades
• It is affordable

Cons

• It cannot replace many blades

 Verdict

This blade combines strength, durability and affordability to make your mowing days smoother. You do not need to worry about wet grass, and even those regions with tough grass will be dealt with fast and easy.

View price here

MaxPower 331376B Mower Blade – Ideal for medium sized lawns

This steel blade is engineered to cut through tough grasses and medium length grasses even in wet conditions.

Features

• Made of steel
• It is 22 inches long
• Fits Toro Recycler
• 7/16 inch center hole

The MaxPower 331376B mower blade is quite strong owing to the steel used in making it. At high rotations, it makes clean cuts, even on wet grass. It has a total length of 22 inches which makes this blade ideal for lawns that are moderate size.

It has a 7/16 inch center hole. It is quite easy to install and remove from the mower, and it can also be used as a replacement for 2 other blades which are the OEM No 104-8697-03 and 108-1764-03. It also does a decent job when it comes to bagging the grass.

Pros

• It is a strong blade
• It replace two other blades
• It works well in tough and wet grasses
• It is great at bagging grass

Cons

• It is not good with uneven grounds

Verdict

This blade is quite strong, making it able to handle wet grass with ease. It I an affordable blade and can also replace two other blade types, making it a decent buy.

View price here

Honda 72531 –VH7-000 Lawn Mower Blades – Only works for Honda

This blade is one of the most powerful contenders for cutting tough and wet grasses.

Features

• It is 20.75 inches long
• Made using steel
• Fits Honda HRX217
• Comes at two blades

This blade is best suited for mulching, but it can also be used effectively as a high lift blade. With its length and width, it is not a small blade. It is made mostly with steel that makes it a strong blade. It comes as two blades which give about 40 inches cutting diameter.

These blades usually come unsharpened, and you may have to pass them through a grinder that gives them that first cutting edge. To give them a good balance you can give them a good sanding. The good thing about them is that they can last up to 5 years before needing sharpening and replacement.

This blade is not exactly the easiest to install. They are medium to high lift blades, and they are not meant for mulching. They work well in tossing grass clippings into the installed bag.

These blades are actually quite strong and can work through tough and wet grass. Unfortunately, these blades only fit into the Honda Mower for which they are made. They are really good as replacement blades for the original ones.

Pros

• They come as 2 blades
• They are durable and can last up to 5 years
• They do a good bagging job
• They are made by Honda which guarantees their quality
• Can work over tough and wet grass

Cons

• They cannot replace any other blades apart from Honda blades
• Installation is quite hard and tedious
• They come dull

 Verdict

These blades come as genuine as can be. They are made by Honda, and they are incredibly strong and durable, giving you a good 5 years before needing replacement. This is quite a bargain.

View price here

USA AYP340BP Mower Mulching Blades – They are universal and can be used for replacing many blades

This steel blade is quite strong, and it can handle both wet and tough grasses effectively.

Features

• It is made of steel
• It is 21 inches long
• It is compatible with many mower brands
• Can work as mulcher and high lift blade

This blade is considered a universal mower blade for its ability to fit seamlessly into many brands including the Husqvarna and Craftsman. It is ideally made to fit into a deck that has a diameter of 42 inches.

Being a strong and durable blade, it can work in just about any lawn size, including larger sprawling lawns. However, they do not work well in places with many obstacles. They tend to bend upon impact, and you may have to replace them when they bend.

This blade can work as a mulcher and as a high lift blade. It cannot, however, work effectively on uneven ground. It is unable to adjust and may leave patches of uncut grass behind.

It comes with a 5 point star, and installing it is not difficult. They actually come as two blades in one package.

Pros

• They come as two blades
• They are strong and durable
• They are easy to install
• They can handle wet and tough grass
• Can work as mulchers and high lift blades
• They can be used in may mower brands

Cons

• They cannot work on uneven ground
• They cannot handle terrain with obstacles

Verdict

These blades are both strong and universal, making them ideal for many situations. However, if your terrain has many obstacles or I uneven, these mower blades may not do much justice.

View price here

MaxPower 561713X 2-Blade Mulching Set – Comes as a set of 2 blades

This blade is quite strong, and is in fact stronger than most blades around.

Features

• Comes as a set of 2 blades
• It is 21 inches long
• It is made of steel
• It has a 5 point star center hole

These blades are mainly meant for mulching, and they are considered universal for their ability to fit into many mower brands such as the Poulan and Craftsman. They are come of the strongest blades in the market, making them ideal for many terrains and even wet conditions.

They are made to be quite thick and they have been known to cut through obstacles without sustaining much damage. This, however, is discouraged since constant impact could lead to irreparable damage.

Being that they are strong and durable, they tend to dull sooner than they age, meaning you will have to sharpen them a number of times over the course of their lives. Even though they work in different terrains, they tend to leave patches of uncut grass on uneven ground, especially at the center of the blade.

It is quite impressive that it is a strong blade, but the demerit of this characteristic is that it is more likely to snap upon high impact than it is to bend, which translates to replacement as opposed to repair.

Pros

• It is a strong and sturdy blade
• It can be used in many mower brands
• It is very durable
• It works well in areas with obstacles such as roots
• It is an excellent mulching tool

Cons

• They may need constant sharpening
• They are more prone to snapping than they are to bending

Verdict

This is likely one of the strongest mulching blades in the market. It is able to work through obstacles without sustaining much damage. It is recommended that care is taken so as not to snap it.

View price here

Toro 22” Recycler Mower Blade – Can only be used for Toro Lawn Mowers

This blade is an excellent mulcher for your grass. Unfortunately, it cannot be used in any other mower brands.

Features

• It is 22 inches long
• It has ‘teeth’
• It is made using steel

As a mulcher, this blade leaves very small pieces of grass on your yard that you do not have to pick up. Being that they are quite fine, they can be left out on the lawn to act as fertilizer. It is an excellent mower for tough grass, and it work just as effectively on wet grass.

It works quite fast and it is a durable tool, but it tends to dull quite fast, meaning that you may have to sharpen it more often than other mower blades. It can also be sanded down to give it better balance. If you wish to bag your grass, you do not need to worry. It does an excellent job at pushing the grass into a bag to dispose of later.

Pros

• It is excellent at mulching
• It clips grass to a fine size
• It is excellent for wet grass
• It is quite long
• It is strong and durable

 Cons

• It dulls easily and needs frequent sharpening

Verdict

This blade is an excellent fit for mulching and clipping wet grass. It is quite strong, but it dulls really fast. Unfortunately, it can only be used for Toro mowers.

View price here

Buying a Mower Blade – What you need to consider

Terrain of the ground – There are mower blades that are excellent for uneven terrain. Some others, however, are unable to adjust and reach lower patches of ground.

Obstacles on the ground – If you have grounds that have many obstacles, you should consider getting a blade that is reinforced. These will be able to get rid of the grass and the obstacles, but be careful not to cause the blade to snap.

Cost of blade – Find a blade that is both good and affordable. There is no point in buying an expensive blade that will need replacement soon. Find a blade that balances on durability and cost, putting in mind also that cheap is expensive.

Final Verdict

Tending your lawn in wet weather can be something of a tall order. The grass tends to grow faster during these seasons, and it definitely needs more care.

For this reason, it is imperative to invest in a blade that works in the wet grass just as well as it does on the dry grass. Ensure that you put the outlined factors in the short buying grass to help you pick a perfect fit for your lawn.

Happy mowing!